Alphin Watts Electric handles residential and commercial electrical work in Mattapan and the surrounding area. Whether you need a quick repair, a full panel upgrade, or wiring for a new addition, we take the call and get the work scheduled. Licensed electricians. Code-compliant wiring. Fair rates.
We are available every day from 6:30 AM to 10:30 PM, and same-day service is often available when the schedule allows. The rate is confirmed on the call before anything is booked, so you know what you are getting into before we arrive.
Dealing with a tripping breaker or a dead outlet? Those problems do not fix themselves, and putting them off usually makes things worse. We diagnose the fault, explain what caused it, and get it corrected the same visit when we can.
Common repair calls include flickering or dimming lights, outlets that stopped working, breakers that trip repeatedly, and GFCI or AFCI faults that will not reset. Some of these have straightforward causes. Others point to something deeper in the wiring or at the panel. Either way, we run through a proper diagnostic before we start replacing parts.
We take pride in the electrical work we leave behind, and that starts with finding the actual source of the problem rather than patching around it. We'll find the fault and fix it right.
An aging or undersized panel is one of the more common problems in Mattapan's older housing stock. Panels that were sized for 60 or 100 amps decades ago often cannot carry the load a modern household or business puts on them. Breakers that trip under normal use, fuses that blow regularly, or a panel that runs warm to the touch are all signs the service may need attention.
We handle 200-amp service upgrades, subpanel installation, and service-entrance and meter upgrades. A load calculation is part of the process, so the new panel is sized correctly for what the building actually needs, not just what the old one had. We also install arc-fault and ground-fault breakers where code requires them.
If you are adding a major appliance, finishing a basement, or need dedicated circuits to support new equipment, the panel has to be able to carry the added load. We handle the electrical supply side of that work, from the panel out to the circuit, so the equipment you are adding has the power it needs. Wiring work is checked against code before sign-off.
You shouldn't have to chase an electrician for answers, and you shouldn't have to wait long to get a simple installation scheduled either. Outlet, switch, and lighting work is some of the most common electrical work homeowners, landlords, and property managers call about, and we handle all of it.
On the outlet side, that includes GFCI and AFCI outlets in kitchens, bathrooms, and other required locations, USB outlets for convenience, and standard outlet installation or replacement throughout the home or building. For switches, we install dimmer switches, standard replacements, and multi-location switch wiring.
Lighting installation covers recessed and LED fixtures, indoor ceiling and wall fixtures, exterior and security lighting, and landscape lighting at the property line. Ceiling fan installation and wiring is part of this work too, whether it is a new fan in an existing box or a full wiring run to a location that did not have one before.
We treat your home and its wiring the way we would our own. We keep your home powered and safe.
When the electrician arrives, the real work begins, and for dedicated circuit and rewiring jobs, that means doing it right from the panel to the endpoint. Dedicated appliance circuits for dryers, electric ranges, dishwashers, and other large appliances need to be sized and wired correctly to carry the load without tripping breakers or creating a fire hazard.
We also handle whole-home rewiring and partial rewiring for homes where the existing wiring is no longer safe or code-compliant. Basement wiring, garage and workshop circuits, and weatherproof outdoor outlets are part of this work. If you are finishing a space or adding to the building, we run the wiring for the addition, including hard-wired smoke detectors where required.
Grounding and bonding are part of every wiring job we do. New construction wiring and addition wiring are handled the same way, with code-compliant runs and proper connections throughout. We show up ready to work.
Mattapan's housing stock leans heavily on pre-1950 construction. Triple-deckers, single-families, and multi-unit buildings throughout the neighborhood were built long before modern wiring standards, and that means knob-and-tube wiring, aluminum branch wiring, and undersized panels are common finds. At the same time, EV adoption in this part of Massachusetts is growing fast, and nor'easters and ice storms make reliable backup power a real concern rather than a luxury.
These are the jobs that come up most often here, and we handle each one on its own terms. You know who to call if you ever need us again.
Knob-and-tube wiring was standard in homes built before the 1950s, and aluminum branch wiring was common through the 1970s. Both systems present safety concerns by today's standards, and many insurers will not cover a home that still has them in place. In Mattapan's older triple-deckers and single-family homes, these systems turn up regularly during inspections and renovation work.
Remediation involves replacing the old wiring with modern copper wiring run to current code, including proper grounding and updated connections at outlets, switches, and fixtures. We assess what is in place, explain what needs to come out, and complete the work in a way that brings the affected circuits up to code.
A Level 2 home charger runs on a 240-volt dedicated circuit, and getting one installed correctly starts with a panel capacity check. If the panel has room, we run the circuit and install the charger outlet or hardwired connection. If the panel is at capacity, a service upgrade may be needed first, and we handle that work as well.
Permit requirements vary depending on the municipality and the scope of the work. We confirm what applies at your address before we schedule, so the installation is done right and ready for inspection.
The electrical side of a generator hookup involves installing a transfer switch, running the wiring from the generator to the panel, and making sure the system is properly grounded and bonded. The transfer switch is what keeps the generator from back-feeding the utility line, which is a safety requirement, not an optional upgrade.
We handle the panel integration and wiring for standby and portable generator hookups. What you can expect from our side of the job is a properly wired, code-compliant connection that lets the generator do its job safely when the power goes out.
The homes and wiring in this area have their own quirks, and older systems are more vulnerable to surge damage than most homeowners realize. A panel-level surge protection device is installed at the main panel and protects the entire home from voltage spikes caused by lightning, utility switching, or large appliances cycling on and off. It is one of the more straightforward upgrades available, and it protects everything plugged in throughout the building.
Electrical safety inspections cover the panel, wiring, outlets, grounding, GFCI and AFCI protection, and visible wiring throughout the home or building. They are worth scheduling before buying a property, after storm damage, or any time you have concerns about an older wiring system. An inspection gives you a clear picture of what is in place and what, if anything, needs attention.
Prompt response, even for last-minute electrical calls, is part of how we work. We'll find the fault and fix it right.
We take calls from Mattapan and the neighborhoods around it, including Dorchester, Roslindale, Hyde Park, Readville, West Roxbury, and Milton. If you are in Suffolk County or just across the line into Norfolk County, give us a call and we can confirm coverage for your address.
We are available every day from 6:30 AM to 10:30 PM. Same-day scheduling is available when the calendar allows, and we do take calls on weekends. We do not promise a specific arrival window, but we confirm the appointment before anyone heads out.
We work with homeowners, landlords, property managers, and businesses throughout the area. Residential calls cover everything from single-family homes to multi-unit buildings. Commercial work includes panel upgrades, office and retail wiring, dedicated circuits for commercial equipment, and electrical repairs for business properties.
The work on both sides is performed by licensed electricians who know the code requirements that apply in Massachusetts. Whether the job is a single outlet replacement or a full commercial panel upgrade, the approach is the same: assess the situation, explain the scope, and do the work correctly.
Licensed electricians. Code-compliant wiring. Fair rates.
Getting a price is straightforward. Call us, describe the work, and we give you a rate before anything is scheduled. What the quote covers is explained on the call, so there is nothing to figure out after the fact.
Cost depends on the scope of the job, the materials involved, and whether any additional work turns up during the visit. We give you that information up front so you can make a decision without pressure.
Simple booking. Clear pricing. Safe, solid wiring.
Call (857) 626-9359 for a quote.
We handle residential and commercial electrical work across the full range: repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, indoor and outdoor lighting, ceiling fans, dedicated circuits, whole-home rewiring, EV charger installation, backup generator hookups, and electrical safety inspections. We work with homeowners, landlords, property managers, and businesses throughout Mattapan and the surrounding area. If you are not sure whether your job fits, call and describe it and we will give you a straight answer.
Yes, and it is some of the most common work we see in Mattapan. Pre-1950s homes throughout the neighborhood still have knob-and-tube wiring, and aluminum branch wiring turns up regularly in homes renovated through the 1970s. We assess what is in place, explain what needs to come out, and replace it with modern copper wiring run to current code.
Call (857) 626-9359 and describe the job. We give you a rate before anything is scheduled, and we explain what the quote covers so there is nothing to figure out after the fact. The scope and the price are settled on the call.
We do. Residential calls cover single-family homes, triple-deckers, and multi-unit buildings. Commercial work includes panel upgrades, office and retail wiring, dedicated circuits for commercial equipment, and electrical repairs for business properties. The process is the same on both sides: a call, a quoted rate, and a scheduled visit.
Stop using the affected outlet or circuit immediately and do not try to reset the breaker or touch the panel if it feels warm. Turn off the breaker for that circuit if you can do so safely, and call us at (857) 626-9359 to describe what you are seeing. These are signs of a fault that needs a licensed electrician, not a wait-and-see situation.
A breaker that trips repeatedly is telling you the circuit is carrying more load than it can handle, or there is a fault somewhere in the wiring or at a connected device. Resetting it without finding the cause does not fix the problem and can create a safety hazard over time. We run a proper diagnostic to trace the fault before we recommend any repair.
You call, describe the problem, and we give you a rate and schedule a visit. When the licensed electrician arrives, the work starts with a diagnostic: checking the panel, tracing the affected circuit, and testing outlets or fixtures involved. Once the fault is identified, we explain what it will take to fix it and complete the repair, confirming the work is correct before we leave.
Same-day service is often available when the schedule allows. We take calls every day from 6:30 AM to 10:30 PM, including weekends. Call (857) 626-9359 and we will let you know what we can do for your address and your timeline.
We take calls and schedule appointments every day from 6:30 AM to 10:30 PM. When you call, let us know what times work for you and we will find a slot that fits. We confirm the appointment before anyone heads out so you are not left waiting without information.
It helps to clear access to the main panel and to the work area before the visit. If the panel is behind stored items or the outlet location is blocked by furniture, moving those things ahead of time lets the work start without delay. We will let you know on the call if there is anything specific to prepare for your job.
The rate depends on the scope of the job, the materials involved, and what the work actually requires, not on square footage as a flat formula. A small home with complicated wiring may cost more to repair than a larger home with a straightforward fix. We explain the pricing on the call so you know what you are agreeing to before we schedule.
Call us at (857) 626-9359 and we will find a new time that works. We ask that you let us know as early as possible so the slot can be offered to another customer who needs service. Rescheduling is straightforward and we do not charge a fee for it.
Alphin Watts Electric is available every day from 6:30 AM to 10:30 PM for residential and commercial electrical work throughout Mattapan and the surrounding area. Whether you need a same-day repair or want to schedule a panel upgrade, wiring project, or safety inspection, the process starts with a call.
Power restored. Code-compliant. Done right.
Call (857) 626-9359 to get a quote and get on the schedule.
Mattapan's housing stock runs from pre-war triple-deckers to newer commercial builds, and the electrical work each one needs is different. We handle everything from a single outlet replacement to a full service upgrade, and we bring the same attention to code compliance and workmanship to every job. Below is a plain-language look at what we do, who each service fits, and what is worth knowing before you call.
| Service | What's Included | Best For | Things to Know |
|---|---|---|---|
| Ceiling Fan Installation | fan and wiring installationceiling box upgradescircuit load check | rooms where the existing box was never rated for a fan | A standard light fixture box cannot safely support a ceiling fan. We upgrade the box as part of the installation when needed. |
| Electrical Repairs & Troubleshooting | flickering lightsdead outletstripping breakerscircuit diagnostics | homeowners and landlords dealing with an active electrical problem | A symptom like a flickering light or a dead outlet often points to a deeper wiring issue. We diagnose before we repair so the fix addresses the actual cause. |
| Basement & Sump-Pump Circuits | finished basement wiringdedicated sump pump circuitGFCI protection in wet areas | homeowners finishing a basement or adding reliable sump pump power | A sump pump should run on its own dedicated circuit so a tripped breaker elsewhere cannot take it offline during a storm. |
| Backup Generator Installation | transfer switch installationgenerator-to-panel wiringgrounding and bondingpost-installation inspection | homes and businesses that need essential circuits running when the grid goes down | A transfer switch is a code requirement that prevents the generator from back-feeding the utility line. We inspect the completed hookup after installation to confirm everything is operating correctly. |
| Wiring & Circuit Installation | new circuit runshome addition wiringgarage and basement circuitssubpanel installation | renovations, additions, and finished spaces that need circuits wired from scratch | Permit and inspection requirements apply to most new wiring work. We handle that as part of the job. |
| Lighting Installation | recessed lightingpendant and chandelier fixturessecurity and motion lightsweatherproof exterior outlets | interior upgrades and exterior security lighting on single-family and multi-family homes | Exterior lighting circuits require proper grounding and weatherproof materials. All outdoor installations are checked against code before sign-off. |
| Breaker & Fuse Repair | breaker replacementfuse box repairpanel fault diagnosis | homes where a breaker will not reset or a fuse keeps blowing | A breaker that trips repeatedly is signaling an overloaded or faulted circuit. Replacing the breaker without finding the cause does not solve the problem. |
| Electrical Safety Inspections | panel and wiring condition reviewGFCI and AFCI coverage checksmoke and CO detector inspectionpre-sale and rental compliance | home buyers, sellers, landlords, and property managers who need a full system review | We perform inspections for home purchases, pre-sale preparation, rental compliance, and renovation sign-off. Hard-wired smoke and carbon monoxide detectors are part of what we inspect and install where required. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradespanel replacementload calculationsfuse box conversions | homes with older 60- or 100-amp service that can no longer carry modern electrical loads | We run a load calculation before any upgrade to size the panel correctly for existing and planned circuits, including EV chargers and dedicated appliance runs. |
| Outlet & Switch Installation | GFCI outlet upgradesUSB outletsdimmer switchesstandard outlet additions | homeowners, landlords, and property managers keeping units functional and code-compliant | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older units often lack it entirely. |
| Knob-and-Tube & Aluminum Rewiring | knob-and-tube identification and replacementaluminum branch circuit remediationwhole-home rewiringcode-correction wiring | pre-1950s Mattapan homes with original wiring or aluminum branch circuits from later renovation eras | Knob-and-tube wiring has no ground and cannot support GFCI or AFCI protection. Aluminum branch wiring loosens at connections over time, which creates a fire risk at outlets and fixtures. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuits240-volt runssump pump circuits | kitchens and laundry rooms where appliances share circuits they were never meant to share | A dedicated circuit means one appliance, one circuit. We size the wire and breaker to match the appliance's actual rated draw. |
| EV Charger Installation | Level 2 charger installationdedicated 240-volt circuitpanel capacity checkpermit coordination | EV owners who want reliable home charging without relying on a standard 120-volt outlet | A Level 2 charger requires a dedicated 240-volt circuit and a panel that can carry the added load. We confirm panel capacity before any circuit work starts. |
| Whole-Home Surge Protection | panel-mounted surge deviceprotection from lightning and utility spikesappliance and electronics coverage | homeowners who want to protect electronics, appliances, and wiring from voltage events | A whole-home surge device is installed at the main panel and protects every circuit in the building. It is one of the more straightforward upgrades available for the protection it provides. |
Call (857) 626-9359 to talk through what your home or property needs and get a straight answer on pricing before anything is scheduled.
(857) 626-9359