Some electrical problems announce themselves. A breaker that trips the moment you reset it, an outlet that stopped working overnight, a burning smell near the panel. Those calls go to the top of the list, and we answer them around the clock, any day of the week. Others are slower-moving: a panel that is running out of room, lights that dim when the refrigerator kicks on, a garage that has never had its own circuit. Those deserve the same attention, just on a schedule that works for you.
We take both kinds of call. Westwood homeowners, landlords with rental units, and property managers who need electrical issues handled without a lot of back-and-forth are all people we work with regularly.
Call (857) 626-9359 and describe what you are seeing. We will take it from there.
Before any work is scheduled, you get a price. That happens on the call, once the job is scoped. The figure is based on what the work actually involves, not a flat rate handed out before anyone knows what they are dealing with.
A few things move a quote in one direction or another. What the fault turns out to be once it is traced. What has to be opened up to reach it. Whether the existing circuit can carry the change you are asking of it, or whether the panel needs to be addressed before the circuit can be added. Grounding and bonding work sometimes surfaces during a repair visit and changes the scope of what is needed.
What you will not be asked to do is commit to a job before you know what it costs. The price is confirmed before anyone starts. Straight scheduling. Upfront pricing. Code-compliant wiring.
Multi-unit buildings in a town this size tend to mix private and shared electrical infrastructure in ways that are not always obvious from inside a unit. The panel serving your space may be in a basement corridor, a utility closet on a different floor, or a locked mechanical room. Knowing where it is before the visit saves time.
Where part of the service is shared, the work inside your unit is still yours to address. What falls outside your walls, on the other side of a meter bank or in a shared riser, is a different question. We will tell you on the call what is likely within scope and what you may need to take up with a building manager or the utility. Getting that sorted early means the visit covers what it needs to cover.
Vaulted ceilings and two-story entryways make a lighting job more involved than a standard fixture swap. Running a new circuit to a high ceiling, replacing a fixture in a stairwell, or adding recessed LED lighting in a great room all require planning the access before the work starts. We factor that in when the job is scoped so there are no gaps between what was quoted and what the visit actually takes.
Older homes often have wiring run through attics and crawl spaces that was installed in a different era and has not been touched since. Knob-and-tube in an attic, aluminum branch wiring in a crawl space, or junction boxes buried under insulation are all things we find and address. The work in those spaces takes longer than a straightforward wall repair, and the quote reflects that.
A 100-amp service was adequate for a house built decades ago. It is not adequate for the same house today if it is running a modern kitchen, a home office, an EV charger, and central air conditioning on the same panel. When the breakers trip under normal load or there are no open slots left, a service-entrance and meter upgrade is usually the right answer. We run a load calculation first so the new service is sized to what the home actually needs.
Properties in Westwood that rely on a well or run an irrigation system need dedicated circuits sized for the pump load. Those circuits are not interchangeable with general household wiring. If a pump is losing power intermittently or a new system needs to be connected, we handle the circuit from the panel out, including the disconnect and any protective devices the installation requires.
An intermittent problem is often harder to pin down than one that fails completely. A breaker that trips only under certain conditions, a circuit that loses power for a few seconds and then comes back, or a light that flickers only when another appliance runs are all worth tracing properly. We trace the fault. We fix the wiring. We restore the power.
Ground-fault and arc-fault protection are required in specific locations by current code, and a lot of older homes in this region do not have them where they belong. Kitchens, bathrooms, garages, and exterior outlets all need GFCI protection. Arc-fault breakers are required on bedroom and living-area circuits. We check for both during any repair or inspection visit and can add arc-fault and ground-fault breakers or GFCI outlets as part of the same job.
Adding a subpanel is the right move when a detached garage, a workshop, or an outbuilding needs more capacity than a single circuit can provide. A subpanel fed from the main service gives you multiple circuits in one run, which is cleaner and more practical than pulling individual circuits from the house for every outlet and fixture you want to add. Adding a circuit is often simpler than people expect, and a subpanel is frequently the most efficient way to handle a space that needs real electrical capacity. If none of that quite fits, the electrical service list covers the wider range.
We are available any hour, any day, which means urgent problems do not have to wait for a business-day window. For jobs that are not emergencies, we work out a time on the call and confirm what the visit will cover before anything is booked. If you are a landlord or property manager with a tenant in the unit, we can coordinate access so the work gets done without requiring everyone to rearrange their schedule.
Commercial properties and home-based businesses have the same electrical needs as any other building, but the stakes of a disruption are higher. We plan the work with that in mind, isolating circuits where possible rather than shutting down the whole panel, and talking through the sequence before the visit starts. A local electrician for homeowners is also a resource for the small business owner who cannot afford to go dark for half a day.
The panel is where most electrical work either begins or ends. In a Westwood home, it is commonly in the basement, a utility closet, or the garage. If access to any of those spaces is blocked by stored items or a locked door, the visit takes longer than it needs to. Clearing a path to the panel before the electrician arrives is the single most useful thing you can do.
For work at specific outlets or fixtures, move furniture and stored items away from the area in question. If the job is in a finished basement or an attic, let us know when you call. We'll get the job wired and finished, but access that has to be worked around adds time that could be avoided.
Westwood sits in Norfolk County, and the towns around it are part of our regular service area. If your property is in Norwood, Dedham, Dover, Needham, or Medfield, we take those calls the same way we take calls from Westwood. The work is handled locally, scoped on the call, and priced before anything is scheduled.
If your address is not on that list, call and ask. Coverage across Norfolk County and the surrounding area is part of what we do.
The work area is left clean and the electrical system is left in working order. Any covers, plates, or panel doors that were removed during the work are replaced before we leave. If there are follow-up items that were identified but not addressed in the same visit, we note them and discuss next steps with you.
Both types show up regularly in the older homes across this region, and both affect how a repair or upgrade is scoped. Knob-and-tube lacks a ground conductor, which limits what circuits can be added without addressing the underlying wiring. Aluminum branch wiring requires specific remediation at every connection point rather than a simple splice. If your home was built before 1980 and has not had a full electrical inspection, it is worth describing the age of the house when you call so we can factor that into the scope before the visit.
Yes, for the trim-out. Rough-in covers running the wires and placing the boxes. Outlets, switches, fixtures, and cover plates are installed after the walls are finished and painted. We schedule both visits and confirm the timing so the job closes out properly.
The service entrance is on the property side of the meter, and we handle that work. The meter itself and the lines feeding it belong to the utility. If the service entrance needs to be upgraded or replaced as part of a panel job, we include that in the scope. If the utility's equipment needs attention, we tell you who to contact.
In most cases, yes. If the circuit serving the refrigerator or freezer is not part of the work being done, it stays live. If it is directly involved, we discuss the timing and try to minimize how long it is off. For a panel job where the main needs to come off briefly, we plan the sequence to keep that window as short as possible.
It depends on what the space is used for. A garage with a few lights and one outlet can often run off a single circuit pulled from the main panel. A workshop with power tools, a compressor, and dedicated lighting is a different situation, and a subpanel is usually the more practical answer. We work through that on the call based on what you need the space to do, so you get the right solution rather than one that runs out of capacity the first time you plug in a table saw.
We check the meter and the service entrance as part of the diagnosis. If the fault is upstream of the meter, the utility is responsible for it. If it is between the meter and the panel, or in the branch circuits, it is on the property side. We tell you clearly which side the fault is on and what the next step is in either case.
Access coordination is between the property owner or manager and the tenant. We schedule the visit once access is confirmed. If a visit is arranged and access is not available when we arrive, we discuss rescheduling on the call.
Describing what you are seeing is enough. A breaker that keeps tripping, an outlet that stopped working, a panel that runs out of room every time you add something new.
Call (857) 626-9359, tell us what is going on, and we will scope the job and give you a price before anything is scheduled.
We are available around the clock, any day, including nights, weekends, and holidays. One call. One electrician. One price, agreed first.
Electrical work also reaches these towns: Milton, Abington, Winthrop, Hingham, Rockland.
Below is a plain-language look at the electrical services we handle across Westwood and the surrounding Boston neighborhoods. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If you have a question the table does not answer, the number at the top of the page gets you a real answer and a price.
| Type of Work | What the Job Involves | Common Situations | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Older Westwood homes adding load, EV chargers, or running out of breaker slots | Many pre-war homes in this area are still on 60- or 100-amp service. A load calculation tells you exactly what the upgrade needs to cover before any work is authorized. |
| Wiring & Circuit Installation |
| Remodels, additions, and homes where the existing wiring cannot carry the current load | We scope the circuit run on the call and confirm the price before anything starts, so there are no open-ended commitments. |
| Knob-and-Tube & Aluminum Rewiring |
| Pre-1950 Westwood homes and properties built through the 1970s with aluminum branch wiring | Knob-and-tube wiring has no ground conductor and cannot support three-prong outlets or GFCI protection. Aluminum branch wiring loosens at connections over time and creates heat at splice points. |
Call (857) 626-9359 to get a quote on any of the services above. We will scope the job, give you a price, and get it on the schedule.
(857) 626-9359